Try Amper on 2 machines—free for 30 days*

Unleash the power of your factory

Works with any machine, old or new.
Bypasses PLC and complex machine integrations.
Installs in days, not months.

Want to see Amper in action first? Book a demo

Try Amper on 2 machines—free for 30 days*

Unleash the power of your factory

Works with any machine, old or new.
Connects in multiple ways.
Installs in days, not months.

Want to see Amper in action first? Book a demo

Working with manufacturers just like you

Gleason logo

Installation is simple

1. Clip sensor to any machine's power supply
2. Connect Gateway and allow the system to calibrate
3. Access real-time data from any device

“With Amper, we were able to bump utilization of our second Panel Bender from 20% to 55%. Our main line went from 40% to 65%—and we’ve identified several opportunities to improve on both lines in the coming year.”
Erik Anderson,
Director of Operations & Supply Chain, Leer Inc.

Why try Amper's pilot program?

Try before you buy: test it out on 2 machines
Get real-time insight into machine utilization
Act fast when downtime occurs with automated alerts
Empower staff to get help with andon calls
Identify CI projects with downtime reason reporting

What's in the box?

Amper’s trial box has everything you need to get started with Amper on 2 machines.
You’ll get installation instructions and 2 of everything you see below:

Gateway
Aggregator
Sensor
CAT 5 Cable
Power Supply Cable

What to expect during the pilot

Deployment in less than 30 minutes
Rich visualization and powerful reporting capabilities
Resources for training and guidance
Accurate utilization baseline and real-time visibility into 2 machines
*Pilot eligibility requirements
In order to be eligible for our pilot program, you must have all of the following:
✔️Executive sponsorship ✔️Dedicated project owner
✔️Alignment on timeline, goals and outcomes ✔️ Interest to scale up to 25+ machines if the pilot is successful
CASE STUDIES

Explore customer journeys

see all case studies
“I was so relieved to finally find a simple yet powerful solution like Amper.”
Charles Morley
President
“We had Amper up and running on all of our machines after one day—with no need to stop production.”
Nick Sainati
General Manager
“We've seen a marked improvement on our utilization rate. It's allowed us to increase our orders without investing in extra things.”
Ryan Roberson
President & COO
“I'm learning new techniques. I'm learning new lean processes. I'm learning what it's like to be a shop of the future.”
Jim Carr
President & CEO
“The integration with SAP was a big help to measure targets, track whether we're on time, and ensure that we get up-to-date information.”
Bill Hewitson
President